Applications Control or signal cable for important circuits in industrial plants and station control cable for electric utilities where flame resistance is essential. Suitable for the operation and interconnection of protective devices; rated circuit voltage 600 volts; recommended for operation at 90 ºC maximum continuous conductor temperature in wet or dry locations. Cables may be installed in open air, in ducts or conduits, in tray or trough, and are suitable for direct burial. Utility grade meets or exceeds all UL requirements.

Construction Stranded coated copper conductors. The insulation shall be either fire retardant ethylene propylene rubber (EPR) or fire retardant cross-linked Polyethylene (FR-XLPE). ICEA Appendix E Method 1 color-coded, conductors twisted with suitable fillers, helically applied copper tape shield, XLPO jacket overall, surface printed.

Standards

TC Type Tray Cable per Article 340 of the NEC.
Individual conductors pass UL Standard 44 and the VW-1 vertical flame test.
Individual conductors approved as Type XHHW. 4.Cables Pass IEEE-383 ribbon burner flame test.
Overall jacket approved as Sunlight Resistant.
Cables meet requirements of ICEA Pub. No. S-66-524, NEMA Pub. No. WC7, Cross-linked Polyethylene Insulated Wire and Cable.

Notes

Cables may be supplied with an insulated ground and marked "Open Wiring."
Standard color coding is Method 1 for NEC applications per Appendix E, Table E-2 of ICEA S-73-532(TECH I006). This color coding method omits white and green from the color sequence. A white or green conductor can be supplied on request.
Color Coding also available ICEA Method 1, Table E-1; power sizes, ICEA Method 4.

Options

Bare or Tinned Copper
Flexible stranded conductors
E1 or E2 color codes
EPR Insulation
PVC, CPE, CSPE jackets
Overall copper tape shield
Overall copper braid shield
Overall longitudinal corrugated copper shield
Overall Mylar tape shield with drain wire
1000 volt rated construction

Consult AWG for a variety of alternate constructions for specific applications. less

Request Information

Items	10-502SHX 10 AWG Control Cable FR-XLPE Insulated Conductors, Smooth Helical Bare Copper Tape Shield, Low Smoke Zero Halogen Polyolefin XLPO Jacket, 600V	10-503SHX 10 AWG Control Cable FR-XLPE Insulated Conductors, Smooth Helical Bare Copper Tape Shield, Low Smoke Zero Halogen Polyolefin XLPO Jacket, 600V	10-504SHX 10 AWG Control Cable FR-XLPE Insulated Conductors, Smooth Helical Bare Copper Tape Shield, Low Smoke Zero Halogen Polyolefin XLPO Jacket, 600V	10-505SHX 10 AWG Control Cable FR-XLPE Insulated Conductors, Smooth Helical Bare Copper Tape Shield, Low Smoke Zero Halogen Polyolefin XLPO Jacket, 600V	10-507SHX 10 AWG Control Cable FR-XLPE Insulated Conductors, Smooth Helical Bare Copper Tape Shield, Low Smoke Zero Halogen Polyolefin XLPO Jacket, 600V
Number of Conductors	N/A 2	N/A 3	N/A 4	N/A 5	N/A 7
Conductor Size AWG	N/A 10
Conductor Stranding	N/A 7
Copper Shield Thickness (in)	N/A 0.005
Copper Shield Thickness (mm)	N/A 0.13
Nominal Jacket Thickness (in)	N/A 0.045	N/A 0.060	N/A 0.060	N/A 0.060	N/A 0.060
Nominal Jacket Thickness (mm)	N/A 1.1	N/A 1.5	N/A 1.5	N/A 1.5	N/A 1.5
Nominal Cable O.D. (in)	N/A 0.535	N/A 0.595	N/A 0.640	N/A 0.695	N/A 0.750
Nominal Cable O.D. (mm)	N/A 13.6	N/A 15.1	N/A 16.3	N/A 17.7	N/A 19.1
Approximate Weight /MFT (lb)	N/A 179	N/A 234	N/A 289	N/A 340	N/A 442
Approximate Weight /KM (kg)	N/A 266	N/A 348	N/A 430	N/A 506	N/A 658

Contact